CP mosaic

Crystal Palace Mosaic Professional Mosaic Supplier Since 2001

CP Mosaic Facebook CP Mosaic Facebook CP Mosaic Twitter CP Mosaic Youtube

Keywords:mosaic tile manufacturer,mosaic tile factory,mosaic tile producer,mosaic tile supplier,glass mosaic producer
Current location: Home»CP Mosaic News » News center » Industrinal news » How to Mosaic Binder?

How to Mosaic Binder?

Categories: Industrinal newsStars: 3Stars Visit: - Release time: 2016-07-13 19:59:00
Font size:【 Large Middle Small Source: Editor: Author:

 1, The mosaic binder into the water and stir into a paste, and then poured into water first note binders, use manual or electric mixer while stirring.

2, Gouache mixing fully, completely raw dough prevail, still need to complete after stirring for about ten minutes about the place slightly stirred before use, to increase adhesion.
3, Using mosaic mosaic paving binder, using conventional pasting construction method, is about mixing good adhesive coated on the back of the mosaic, and then paste it on top of the substrate. But this is likely to cause the hollowing paste method, we recommend the use of a doctor blade method, as follows: the adhesive applied with a toothed blade on top of the face, so that uniform distribution, and the formation of a toothed bar. Each painting about one square meter (depending on the weather temperature), and then in the open time rubbing pressure on the mosaic can be. Select toothed blade size should consider the degree of flatness irregularities face and the back of the mosaic. As the back of the deep fissure mosaics or mosaics larger and heavier, it should be double coated adhesive, namely in the back while working face painted and mosaic binder.

Information about ""

Recommended Products