1, It is suitable for indoor and outdoor concrete, plaster base surface, brick walls, the masonry substrate paste mosaics, marble, natural stone, ceramic tile, ceramic tile, quarry tile and the like.

2, It is suitable for long-term immersion bath, pool and other occasions. Executive Standard: JC / T547-2005 base surface treatment 1, all the base surface should be solid, dry, clean, no shaking, no oil, wax stains, concrete curing agents and other loose material, there are paint base surface should be rough, at least exposure to 80% of the original substrate.

3, The new concrete surface should be at least 28 days before curing paving; new plaster base surface should be cured a minimum of seven days before paving.

4, The old concrete or plaster base surface can be used industrial detergent or degreaser to clean, then rinse with water cannons, dry surface after 24h before tiling.

5, Remove the concrete surface residue, especially on sloping concrete slab the remaining release agent.

6, The high water absorption of the substrate or at high temperatures, dry conditions, pre-construction must first wetting the base surface.