Installation Tips: It can used a template or other board as the bottom, cement wall brushed with varnish, and then paste and install the mosaic.

 

 

The wood and wall needed to be cleaned up before pasting.In order to make it looks more beautiful and paste more convenient,we could mark line on the wood.(Because the 3M adhesive of the aluminum-plastic panel is very strong,it could not be free to tear down once finished pasting up on the wall or wood.)

 

 

 

 

Pill off the 3M plastic film on the backside of the mosaic.

 

 

According to the line marked before,install the aluminum plastic panel mosaic on the wall or wood.After the mosaic stuck on the wall or board is fixed,please use hand or a rubber hammer to press lightly the whole piece of mosaic.

 

 

 

 

After all the aluminum plastic panel mosaic are pasted completely, then pill off the transparent protective film in the front of the mosaic,and finally clean the 

surface of the mosaic with a soft cloth.

 

 

Notes: About the aluminum plastic panel mosaic,it does not need to be filled the gaps.And after being stuck, do not tear down optionally,because that will affect the paste of the adhesive and even do severe damage to the mosaic.

 

Thanks for your precious time and reading.

CP Mosaic