The thickness of the Mosaic itself has the difference, ranging from 2 mm to 5 mm.Some special material Mosaic can even reach a centimeter.The thickness of the Mosaic and ceramic tile also have difference, so in order to make wall space whole is flat and level, sometimes want to consider in the thinner area to do a leveling layer.

2 construction joint spacing to uniform

Into pieces of Mosaic between seam spacing must be uniform, and the size of the spacing between the small pieces of Mosaic and original joint spacing is equal, so look at the past is a integrated whole wall space, can not see by piecing up chunks of the Mosaic model.

3 control the pace of construction

May arise in the process of the Mosaic of the shop is stuck like flow slurry, sliding blocks, the phenomenon such as these are generally caused by construction rhythm didn't grasp well.Much better to wait a batch of cement after curing, a little farther on the next batch, then spread out effect will be better.

4 with caulking agent to jointing

Now commonly used to tick off seam caulking agent.With wet white cement to wipe it again first, reoccupy dry cement make it cured as soon as possible, and finally with a dry towel swabbed clean, so that make to the effect of the Mosaic wall is uniform, adornment effect is better than a piece of material, because can't see construction joints.